[Scratchbox-users] It doesn't search /lib or /usr/lib when using compiler created by crosstool

[Jussi Hakala]

I'm confused.

You mean you're building a toolchain inside scratchbox using crosstool, 
or you're trying to import a toolchain created with crosstool to scratchbox?

Anyway, only latter of the choices above works (or has any meaning).

The recommended way of bringing new toolchains into scratchbox can be 
found from [1]. In theory, everything should work mostly out-of-the-box. 
In practice, you may need to do some tweaking, depending on your toolchain.

And, of course, if you create the toolchain yourself, it would be 
advisable to also verify that the toolchain is ok prior bringing it into 
scratchbox. It's much easier to debug one problem at a time :)

[1] http://scratchbox.org/wiki/ForeignToolchains

Regards,

   Jussi

thisway.diy wrote:
>    I use crosstool-0.43 to build a toolchain in scratchbox, with the host-gcc target.
> But it doesn't search the /lib or /usr/lib when linking.
>    Even I add "NATIVE=yes" in binutils-2.15/ld/genscripts.sh, and then re-build the toolchain
> with crosstool again, the question is still the same.
>    I have 'google' for that two days, just find a solution to set the variable GCC_EXEC_PREFIX:
> export GCC_EXEC_PREFIX=/usr/lib//
>    Do somebody have a better way? I am curious why the toolchains pre-builded by scratchbox.org is ok.
>    The toolchain was build with gcc-3.4.5, glibc-2.3.6 and binutils-2.15.
> 
> 　　　　　　　　thisway.diy
> 　　　　　　　　thisway.diy at 163.com
> 　　　　　　　　　　2007-12-05
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Scratchbox-users mailing list
> Scratchbox-users at lists.scratchbox.org
> http://lists.scratchbox.org/cgi-bin/mailman/listinfo/scratchbox-users